You may find that when you go over a bump that you hear a clunking sound or creaking sound up front. This is could be from your strut rod bushings going bad. Also you may find that your SHO may not go where you are steering it. You should replace your strut rod bushings when you replace your struts as everything will be apart. If you get new control arms your bushings will be new.
The control arm bushings are a 2-piece design for a simple install unlike other 1 piece designs.
TPR is an upgrade over your stock rubber bushings and they will not squeak like poly bushings do.
A common problem on 89-95 bushings is the front strut rod bushing retainer working itself loose. You will not be able to see it but you will notice it by lose in responsiveness as well as some odd clunking sounds. You should have the retainer welded up to stop this. If there is too much rust Moog makes a replacement kit to fix this.
Includes 4 (2x side for a total of 4) front strut rod bushings per application.
Bushings are black TPR.
We give you both sides because if you need to replace one side then the other is close behind.
1986-1995 Taurus (all motors)
Got a question about this or any other SHOSource product? Email us: firstname.lastname@example.org