Shopping cart is empty
0 item(s)
      Sway Bar
Whos Online 
There currently are 20 guests online.
Comments more
3.0L/3.2L SHO Fuel Injector Seals 89-95
Auto Parts stores did not have correct ones for the bottom, ..
5 of 5 Stars!
Links more
New Articles (0)
All Articles (6)
2010 SHO (2)
How-To -> (3)
SHO Convention (1)
Shipping & Returns
About Us
Internal error has occurred.

Polyurethane Front Sway Bar Bushings 86-07



Polyurethane Front Sway Bar Bushings 86-07

You may find that when you go over a bump that you hear a clunking sound or creaking sound up front. One area that is often neglected is the swaybar bushings. These bushings are the pivot point for the sway bar. If the bushings are worn, the swaybar moves around as it tries to pivot which can cause erratic handling of the car. You will need to replace your swaybar bushings any time you change swaybar diameters, and we recommend inspecting or replacing the swaybar bushings during a clutch job (or rack replacement) since they are much easier to replace at that point. New swaybar bushings will help restore the responsiveness of your steering that you may have lost.

Enegry Suspension Poly bushings are made From Hyper-Flex and help to reduce body flex.

Tech Notes

Includes 2 front sway bar bushings.

Bushings are black or red polyurethane.

The red bushings tend to squeak and need to be greased with a lithium grease. The black ones are graphite impregnated and need little to no greasing.

These bushings feature a location to add grease.

To replace your front sway bar bushings you will need to drop the rear of your subframe to install.


1986-2007 Taurus (all motors)

Got a question about this or any other SHOSource product? Email us:

Available Options:
Select your front bushings.
Select your color.

Mfg Info

Enegry Suspension

Manufacturer Info
Enegry Suspension Homepage
Other products


by Robert Newman Date Added: Sunday 24 October, 2010
Unscrew the straight grease fittings that come on these, and replace with 90 degree fittings. Then you will have plenty of clearance to grease them on the car. These bushings can be installed without lowering the subframe if you have the Gen III subframe bushing upgrade. I can't comment on that for cars with stock or aluminum SFB's. It's helpful to have a ratcheting combination wrench. The fit was perfect on my car, no modifications required. They perform very well and are a big improvement over the stock sway bar bushings...

Rating: 5 of 5 Stars [5 of 5 Stars]
by Nick George Date Added: Sunday 01 August, 2010
These bushings do their job well. I have not had any squeeking thus far. Note that the metal fittings do not fit the car directly and in order to make sure it clears the subframe bushings, the bottom (one that is higher than the front part of it) needs to be pushed all the way up. Once tightened down it works fine. Also, the oil fittings are pretty much useless on our cars because there isn't enough room to put an grease gun on it unless you have the subframe lowered enough...

Rating: 4 of 5 Stars [4 of 5 Stars]

Extra Info

Current Reviews: 2Read Reviews
Write a review on this product!

Extra Info
This product was added to our catalog on Saturday 25 April, 2009.Notify me of updates to Polyurethane Front Sway Bar Bushings 86-07
Tell someone you know about this product.
  Add to Wish List