You may find that when you go over a bump that you hear a clunking sound or creaking sound up front. This is could be from your strut rod bushings going bad. Also you may find that your SHO may not go where you are steering it. You should replace your strut rod bushings when you replace your struts as everything will be apart. If you get new control arms your bushings will be new.
The control arm bushings are a 2-piece design for a simple install unlike other 1 piece designs.
Enegry Suspension Poly bushings are made From Hyper-Flex and help to reduce body flex.
A common problem on 89-95 bushings is the front strut rod bushing retainer working itself loose. You will not be able to see it but you will notice it by lose in responsiveness as well as some odd clunking sounds. You should have the retainer welded up to stop this. If there is too much rust Moog makes a replacement kit to fix this.
Includes 8 (2x side for a total of 8) front strut rod bushings and washers per application.
Bushings are black polyurethane.
The red bushings tend to squeak and need to be greased with a lithium grease. The black ones are graphite impregnated and need little to no greasing.
We give you both sides because if you need to replace one side then the other is close behind.
We have for an option a set of good used strut rod bushings.
1986-1995 Taurus (all motors)
Got a question about this or any other SHOSource product? Email us: email@example.com