Often times, SHOs have worn out springs, especially in the rear. To fix the bounce and "po-going," new springs are in order. Instead of replacing the old springs with basic stock springs, you have the option of replacing them with very smooth and stiffer springs from B&G. The B&Gs will give you better handling and will lower your car more than the Eibachs, but not too low to cause constant scraping. This will also give you a more aggressive stance and the ride is a little bit stiffer than the Eibachs.
The springs are progressive springs which gives you a softer ride during normal driving but when you go into hard corner the springs will get stiffer. They are powdercoated so they will last a long time and not rust.
It is recommended that you run Koni struts but they can only be found used now. Monroes will hold up to the B&G springs.
Includes 4 Springs.
B&G will lower your Taurus approximately:
The springs rates are:
Front: 257 lb/in
1986-1995 Taurus (all motors) Sedan
Got a question about this or any other SHOSource product? Email us: firstname.lastname@example.org