This is the gasket that goes between the oil pickup tube and the oil pump. Typically, you would need this gasket if you are changing rod bearings, since you need to remove the oil pickup tube. We recommend a new gasket any time you remove the oil pickup tube. It is cheap insurance against a engine killing loss of oil pressure.
These gaskets are custom cut by SHO Source from premium high temperature gasket material. These are the gaskets we use on our own personal SHOs, so you know it is a product you can trust.
These gaskets were designed for the 89-95 3.0L and 3.2L V6 SHO engine.
1989-1995 SHO MTX and ATX
Got a question about this or any other SHOSource product? Email us: email@example.com